How to use self-locking mode

self-locking mode working demonstration

Press remote control up button once, the motor rotates positively, press remote stop button, the motor stops rotating. Press remote control down button once, the motor will rotate in the reverse direction, press remote control stop button, the motor will stop rotating.

How to use momentary mode

momentary mode working demonstration

Press remote control up button once, the motor rotates positively once, release up button, the motor stops rotating; press remote control up button again, the motor rotates positively once again, release up button, the motor stops rotating. Press and hold the up button, the motor rotates continuously. The same principle applies to the down button.

How to change to momentary mode

Programming Methods

Step 1: Press and hold the programming button on top of the switch, the light will come on, the light will flash 1 time after about 2 seconds,then release the button

Step 2: Press up button of the remote control once, then press down button of the remote control again.

Step 3: The light on the top of the switch will flash 3 times, programming is complete.

How to change to self-locking mode

Programming Methods

Step 1: Press and hold the programming button on top of the switch, the light will come on, the light will flash 1 time after about 2 seconds,do not release continue to press and hold the button, after about 2 seconds the light will flash 2 times then release the button

Step 2: Press up button of the remote control once, then press down button of the remote control again.

Step 3: The light on the top of the switch will flash 3 times, programming is complete.